For Perth trades, businesses & fleets
Commercial Vehicle Wraps & Signage in Perth
Turn the vehicles you already drive into the hardest-working advertising you own - designed, printed and fitted in our Osborne Park workshop.
- Osborne Park workshop
- In-house design & print
- One vehicle or a whole fleet
- 4,000+ vehicles wrapped and branded
- Cast vinyl built to last
Where do you fit?
Tell us what you're branding - we'll take you straight there.
Whether it's the one ute you drive, a fleet to keep consistent, or vehicles heading to a mine site, the job is different - so the page should be too. Pick the one that sounds like you.
Sole traders & small business
One or a few vehicles
Brand the ute, van or car you drive every day - decals, part wrap or full wrap, designed and fitted in Osborne Park.
Book a Vehicle Branding ConsultationFleet & multi-vehicle
A fleet to keep consistent
Brand consistency across mixed makes and models, staged rollouts that limit downtime, and a repeatable spec for replacements and new vehicles.
Plan My Fleet RolloutMining & resources
Vehicles heading to site
High-visibility livery, reflective markings and fleet identification built to your site's requirements - repeatable kits for incoming and replacement vehicles.
Discuss Mine-Spec RequirementsSignage levels
How far do you want to take it?
Three levels, one decision. Start with the essentials and step up as far as the budget and the brand call for - we'll tell you honestly where the value sits for your vehicle.
Decals & lettering
Your essentials, cleanly applied.
Business name, phone, website and logo as cut vinyl or printed panels. The lowest-cost way to look legitimate and get found.
- Cut-vinyl lettering & logos
- Door, tailgate & rear-window details
- Single or multi-colour
- Quick turnaround
Best for: Tradies and new businesses who need contact details on the vehicle fast.
Help me choosePartial wrap
Bigger impact, without a full wrap.
Printed graphics across the high-visibility panels - doors, rear quarters and tailgate - blended into the factory colour. Most of the impact of a full wrap for less.
- Printed feature panels
- Designed to suit the factory colour
- Strong roadside presence
- Scales across similar vehicles
Best for: Service businesses wanting a designed, branded look on a budget.
Help me chooseFull wrap
The whole vehicle, on message.
Every panel printed and wrapped in cast vinyl - a complete moving billboard with colour, imagery and brand consistency edge to edge.
- Full colour-change or printed design
- Edge-to-edge coverage
- Protects the paint underneath
- Removable when it's time to refresh
Best for: Brands that want maximum presence and a consistent fleet look.
Help me chooseWhat we brand
If it's a commercial vehicle, we can wrap it.
Every body shape carries branding differently. We design around the real panels, hardware and curves of your vehicle so the result looks deliberate, not stuck on.
Utes
Trays, canopies and tailgates - designed around the hardware tradies actually run.
Explore ute brandingVans
Large flat panels are the best advertising space on the road - used well, they work hard.
Explore van signageTrucks & trailers
Large-format graphics with panel joins planned so the design reads clean at scale.
Cars & SUVs
Company cars and reps' vehicles kept on-brand without looking cluttered.
Buses & people movers
High-visibility branding across big curved panels - seen by everyone, everywhere.
Food trucks & trailers
Brand, menu and personality in one - built for events and the daily pitch.
Explore food truck wrapsNot sure how your vehicle should be branded? Tell us what you drive and we'll show you what works.
Design included
Got a logo but no artwork? That's the normal starting point.
Most businesses come to us with a logo and an idea, not a print-ready design. Our team does the rest - laying it out on your vehicle, getting it approved, then printing and fitting it. One team, one job, no handballing between a designer, a printer and an installer.
Designed in-house, not outsourced
Our team takes your logo, colours and brand guidelines and designs the layout to suit each vehicle's real panels and hardware.
You see it before we print
We mock the design onto your vehicle type so you can approve exactly how it looks before anything is committed to vinyl.
Built to read at a glance
Branding on a moving vehicle has seconds to land. We design for legibility at distance and speed, not just up close.
How it works
From logo to on the road, handled in one place.
A clear path from first chat to handover - and most of it happens under one roof in Osborne Park.
- 01
Consult
We talk through your business, the vehicles, how they're used and what you want them to say.
- 02
Design
Our designers lay out the artwork on your vehicle type and refine it with you until it's right.
- 03
Proof & approve
You sign off on the final design, colours and placement before we print a thing.
- 04
Print & install
We print on quality cast vinyl and fit it in our climate-controlled Osborne Park workshop.
- 05
Handover
Final inspection with you, care instructions, and a repeatable spec on file for next time.
Why Vinyl Wrapz
A workshop that does the whole job properly.
One place for the whole job
Design, print and installation under one roof in Osborne Park - no juggling a designer, a printer and a fitter.
Consistent across vehicles
Brand one vehicle or twenty and keep them all looking like they belong to the same business.
Quality materials
Cast vinyls chosen to handle WA sun and last - materials and warranties confirmed in writing with your quote.
Removable & re-brandable
Quality wrap comes off cleanly when you rebrand or sell, protecting the paint underneath in the meantime.
Our work
Perth vehicles we've put on the road.
A cross-section of commercial work - a single trade ute, a branded bus, a marked-up plant fleet. Different jobs, same standard.
Multi-vehicle fleet branded to a consistent look across different models.
See more like this
Work ute branded with clean lettering and feature panels around the tray hardware.
See more like this
Forklift fleet marked up for identification and on-site visibility.
See more like thisPricing
What vehicle branding costs.
Two honest starting points - the final number follows the design scope, coverage and vehicle count.
Partial branding wrap
from $1,990
- Doors, bonnet or tray zones
- Design proofed on your vehicle template
- Cut vinyl + printed panels
Full branding wrap
Most popularfrom $4,990
- Every painted panel branded
- Maximum street presence
- Design, print and install under one roof
Guide figures for budgeting only - every job is quoted itemised and in writing after we've seen the vehicle or photos, and your quote confirms GST treatment.
Reviews
What customers say about this work.
★★★★★
“Great experience from start to finish. They did an amazing job wrapping our pest control ute. The quality is excellent, the design looks professional, and the truck really stands out.”
★★★★★
“The guys here nailed it with my shop van! Fast and quick turn around, even left me some great little stickers in the car, an epic surprise!”
★★★★★
“Couldn't be happier with the team at Vinyl Wrapz. From start to finish, the experience was seamless and professional. We had two vehicles wrapped and the quality of workmanship is outstanding.”
FAQ
Commercial vehicle branding - your questions answered.
How much does it cost to wrap or sign-write a vehicle in Perth? +
It depends on the vehicle, the level of branding (decals, partial or full wrap) and the design. Cut-vinyl lettering is the most affordable; a printed full wrap is the most involved. We quote each job after understanding the vehicle and what you need from it.
What's the difference between decals, a partial wrap and a full wrap? +
Decals are cut-vinyl lettering and logos applied to panels. A partial wrap adds printed feature panels across high-visibility areas blended into the factory colour. A full wrap covers every panel for an edge-to-edge designed look. We help you pick the level that fits the budget and the goal.
Can you design the artwork, or do I need to supply it? +
We design in-house. Bring your logo, colours and any brand guidelines and our team lays out the design to suit your vehicle. If you already have artwork, we can work with that too.
How long is my vehicle off the road? +
It depends on the level of branding and the vehicle. Lettering can be quick; a full wrap takes longer. We give you a realistic timeline with your quote and work to keep downtime to a minimum - especially across a fleet.
What vehicles can you wrap? +
Utes, vans, trucks and trailers, cars and SUVs, buses and people movers, and food trucks and trailers. If it's a commercial vehicle, we can brand it.
Will a wrap damage my paint? +
Quality cast vinyl professionally installed protects the paint underneath and is designed to be removed cleanly later, on sound factory paint. We assess each vehicle first.
How long does a vehicle wrap last? +
Quality cast vinyl is built to last several years in WA conditions with normal care - actual life depends on sun exposure, washing and how the vehicle is stored - film and workmanship warranties are confirmed in writing with your quote.
Can you match my brand colours exactly? +
We work to your brand colours as closely as the print and vinyl process allows, and show you proofs before printing. Some colours sit outside what print or stock vinyl can reproduce exactly - we'll be upfront if that's the case.
Do you brand whole fleets? +
Yes. We build a repeatable spec so every vehicle matches, schedule installs to limit downtime, and keep your design on file for replacements and new vehicles. See our fleet branding page for how that works.
Do you do mine-spec and high-visibility vehicle signage? +
Yes. Reflective markings, high-visibility livery and fleet identification built to your site's requirements have their own page - it's a distinct job with specific requirements.
Visit us
Visit the Vinyl Wrapz workshop in Osborne Park.
- Vinyl Wrapz18 Rowallan Street, Osborne Park WA 6017
- (08) 9443 8808
- Mon-Fri, 8am-4pm
- Call when you arrive and we'll guide you in.
Interactive map loading shortly